Raspberry Pi 3 Model B | Raspbian Headless Setup over Ethernet | Tutorial & Project


Raspberry Pi 3 Model B | Raspbian Headless Setup over Ethernet | Tutorial & Project

Raspberry Pi 3 Model B is a microprocessor-based Single Board Computer developed by Raspberry Pi Foundation. It contains Broadcom BCM2837 System-on-a-Chip (SoC). Raspberry Pi 3 Model B supports IEEE 802.3 u Fast Ethernet networking standards, with having a speed of approximately 100 Mbit/s. Raspberry Pi 3 Model B will connect to your Ethernet network by using the Static IP Address.

VNC Connect which is included in the Raspbian operating system, consists of a VNC Server application that captures the desktop of the Raspberry Pi in real-time and enable us to remotely control it. We can also transfer files to and from the Raspberry Pi providing we are connecting from the VNC Viewer running on the computer.

COMPONENTS REQUIRED

Components that are required:

- Raspberry Pi 3 Model B: http://s.click.aliexpress.com/e/9gyaG1E

- 16GB Class-10 MicroSD Card: http://s.click.aliexpress.com/e/bdibkGqG

- 5V 2.5A DC Power Supply: http://s.click.aliexpress.com/e/cGVPju0o


CONNECTIONS & SETUP

Raspberry Pi 3 Model B | Raspbian Headless Setup over Ethernet | Tutorial & Project | Connections

In this tutorial, we will use VNC Connect to remotely access and securely control the Raspberry Pi. Software and Source Code that are required:








Now, let’s setup the board.

- Insert the MicroSD Card into the Computer.

- Format the MicroSD Card.

- Write the Raspbian image to the MicroSD Card.

- Configure the Ethernet network on your Computer.

- Open the boot partition of the MicroSD Card.

- Edit and configure the “cmdline.txt” file.

- Create an empty file named “ssh” without any extension, to enable the SSH.

- Insert the MicroSD Card into the Raspberry Pi 3 Model B.

- Connect the one end of Ethernet cable to the Raspberry Pi 3 Model B, and another end to the Computer.

- Connect the Power Supply to the Raspberry Pi 3 Model B.

- SSH into the Raspberry Pi 3 Model B, enter the IP Address into the Host Name field.

- Login to the Raspberry Pi 3 Model B, enter the username as “pi” and password as “raspberry”.

- Enable the VNC Server.

- Connect to the virtual desktop of Raspberry Pi 3 Model B, enter the IP Address into the Search Bar.

- Authenticate to the VNC Server, enter the username as “pi” and password as “raspberry”.

After a few seconds, you should see the desktop of the Raspberry Pi 3 Model B inside a window on your computer. You will be able to control it as though you were working on the Raspberry Pi itself.

Comments

Popular posts from this blog

Heltec ESP32 LoRa DevKit | LoRa Controlled Robot Car | Tutorial & Project

DOIT ESP8285 DevKit | Getting Started & Programming | Tutorial & Project