Posts

Raspberry Pi 3 Model B | Raspbian Headless Setup over Ethernet | Tutorial & Project

Image
Raspberry Pi 3 Model B | Raspbian Headless Setup over Ethernet | Tutorial & Project
Raspberry Pi 3 Model B is a microprocessor-based Single Board Computer developed by Raspberry Pi Foundation. It contains Broadcom BCM2837 System-on-a-Chip (SoC). Raspberry Pi 3 Model B supports IEEE 802.3 u Fast Ethernet networking standards, with having a speed of approximately 100 Mbit/s. Raspberry Pi 3 Model B will connect to your Ethernet network by using the Static IP Address.

Raspberry Pi 3 Model B+ | Raspbian Headless Setup over Ethernet | Tutorial & Project

Image
Raspberry Pi 3 Model B+ | Raspbian Headless Setup over Ethernet | Tutorial & Project
Raspberry Pi 3 Model B+ is a microprocessor-based Single Board Computer developed by Raspberry Pi Foundation. It contains Broadcom BCM2837B0 System-on-a-Chip (SoC). Raspberry Pi 3 Model B+ supports IEEE 802.3 ab Gigabit Ethernet networking standards, but the speed is limited to approximately 300 Mbit/s because of the USB 2.0 bus. Raspberry Pi 3 Model B+ will connect to your Ethernet network by using the Static IP Address.

Digispark ATtiny85 DevKit | Getting Started & Programming | Tutorial & Project

Image
Digispark ATtiny85 DevKit | Getting Started & Programming | Tutorial & Project
Digispark ATtiny85 DevKit is a microcontroller-based development board developed by Digistump LLC. It contains Atmel ATtiny85, 8-bit Microcontroller, which has a 8KB of Flash Memory, out of which 2KB used by the bootloader. It also has 0.5KB of SRAM and 0.5KB of EEPROM, which can be read and written with the EEPROM library. It runs on the clock speed of 20MHz.

DOIT ESP32 DevKit | 16x2 I2C LCD Display | Tutorial & Project

Image
DOIT ESP32 DevKit | 16x2 I2C LCD Display | Tutorial & Project
DOIT ESP32 DevKit is a microprocessor-based development board developed by DOIT.am. It contains ESP-WROOM-32 Wi-Fi Module, which integrates an ESP32‑D0WDQ6 Wi-Fi System-on-a-Chip (SoC). DOIT ESP32 DevKit supports Two Wire Interface or I2C communication by using the Wire library.

DOIT ESP8285 DevKit | 16x2 I2C LCD Display | Tutorial & Project

Image
DOIT ESP8285 DevKit | 16x2 I2C LCD Display | Tutorial & Project
DOIT ESP8285 DevKit is a microprocessor-based development board developed by DOIT.am. It contains ESP-M2 Wi-Fi Module, which integrates an ESP8285 Wi-Fi System-on-a-Chip (SoC). DOIT ESP8285 DevKit supports Two Wire Interface or I2C communication by using the Wire library.

NodeMcu ESP8266 DevKit | 16x2 I2C LCD Display | Tutorial & Project

Image
NodeMcu ESP8266 DevKit | 16x2 I2C LCD Display | Tutorial & Project
NodeMcu ESP8266 DevKit is a microprocessor-based development board developed by NodeMcu Team. It contains ESP12E Wi-Fi Module, which integrates an ESP8266EX Wi-Fi System-on-a-Chip (SoC). NodeMcu ESP8266 DevKit supports Two Wire Interface or I2C communication by using the Wire library.

Raspberry Pi 3 Model B | Raspbian Headless Setup over Wi-Fi | Tutorial & Project

Image
Raspberry Pi 3 Model B | Raspbian Headless Setup over Wi-Fi | Tutorial & Project
Raspberry Pi 3 Model B is a microprocessor-based Single Board Computer developed by Raspberry Pi Foundation. It contains Broadcom BCM2837 System-on-a-Chip (SoC). Raspberry Pi 3 Model B supports IEEE 802.11 b/g/n wireless networking standards and operates on 2.4GHz frequency band. Raspberry Pi 3 Model B will connect to your Wi-Fi network and you should able to find its IP Address on your wireless router’s configuration page.

Raspberry Pi Zero W | Raspbian Headless Setup over Wi-Fi | Tutorial & Project

Image
Raspberry Pi Zero W | Raspbian Headless Setup over Wi-Fi | Tutorial & Project
Raspberry Pi Zero W is a microprocessor-based Single Board Computer developed by Raspberry Pi Foundation. It contains Broadcom BCM2835 System-on-a-Chip (SoC). Raspberry Pi Zero W supports IEEE 802.11 b/g/n wireless networking standards and operates on 2.4GHz frequency band. Raspberry Pi Zero W will connect to your Wi-Fi network and you should able to find its IP Address on your wireless router’s configuration page.

Arduino Uno | 16x2 I2C LCD Display | Tutorial & Project

Image
Arduino Uno | 16x2 I2C LCD Display | Tutorial & Project
Arduino Uno is a microcontroller-based development board developed by Arduino.cc. It contains Atmel ATmega328P, 8-bit Microcontroller. Arduino Uno supports Two Wire Interface or I2C communication by using the Wire library.

Raspberry Pi 3 Model B+ | Raspbian Headless Setup over Wi-Fi | Tutorial & Project

Image
Raspberry Pi 3 Model B+ | Raspbian Headless Setup over Wi-Fi | Tutorial & Project
Raspberry Pi 3 Model B+ is a microprocessor-based Single Board Computer developed by Raspberry Pi Foundation. It contains Broadcom BCM2837B0 System-on-a-Chip (SoC). Raspberry Pi 3 Model B+ supports IEEE 802.11 b/g/n/ac wireless networking standards and operates on 2.4GHz and 5GHz frequency band. Raspberry Pi 3 Model B+ will connect to your Wi-Fi network and you should able to find its IP Address on your wireless router’s configuration page.